4x IMREN AA 1850mAh 2800mWh Micro USB 1,5V
4x IMREN AA 1850mAh 2800mWh Micro USB 1,5V
High quality Li-Ion AA battery from IMREN with protective circuit and also a micro USB charging connection!
The manganese does not react with lithium, so these cells have a high level of intrinsic safety.
Lithium-ion batteries are thermally stable and are not subject to any memory effect.
Lithium-ion batteries are thermally stable and are not subject to any memory effect.
Beacause of their stable and high output voltage, the 1.5 volt batteries are optimized for all devices that are made for single-use batteries.
It is the best replacement for your NiMH AA batteries!
Constant voltage of 1.5V over the entire cycle.
Over 1000 charging cycles are no problem for the 1.5V lithium-ion battery!
Particularly suitable for e.g .:
Flashlights, fairy lights, photo equipment, bicycle lights, solar applications, digital products, toys, etc.
It is the best replacement for your NiMH AA batteries!
Constant voltage of 1.5V over the entire cycle.
Over 1000 charging cycles are no problem for the 1.5V lithium-ion battery!
Particularly suitable for e.g .:
Flashlights, fairy lights, photo equipment, bicycle lights, solar applications, digital products, toys, etc.
4x IMREN AA 2800mWh
| Capacity | 1850mAh |
| Min. Capacity | 1800mAh |
| Normal voltage | 1,5V |
| PCB/BMS integrated | Yes |
| Button Top | Yes |
| Diameter | 14mm ± 0,15 mm |
| Height | 50mm |
| Weight | 20 g |
IC protection / PCB with short circuit, overcharge and deep discharge protection.
High quality cells with a long service life and high cycle stability. Developed for flashlights and battery mods.
Package: 4x IMREN AA + 4 cable
WARNING:
- Li-Ion cells are very sensitive to charging characteristics and may explode if mishandled.
- Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
- Strongly suggest that you use PCB-module or a Li-Ion Battery recharger.
- Never use conventional DC adapter.
- We are NOT responsible for any damage that is caused by the misuse of the Li-Ion Battery
Caring for
- Charge battery with good quality Lithium Polymer charger. A poor quality charger can be dangerous.
- Set voltage and current correctly (failure to do so can cause fire).
- Please check cell voltage after the first charge.
- Example: 1-Cell: 4.2V (4.15 to 4.22)
-
- Do not discharge battery to a level below 2.5V per cell under load. Deep discharge below 2.5V per cell can deteriorate battery performance.
- Use caution to avoid puncture of the cell. Puncture of cells may cause a fire.
The symbol with the crossed out garbage can (§ 17 paragraph 1 Battery Act) means that the disposal of batteries and accumulators in the household waste is prohibited by law. On batteries and accumulators you can find the chemical signs "Hg" (mercury), "Cd" (cadmium) and "Pb" (lead) (§ 17 paragraph 3 Battery Law). If more than 0.0005 mass percent mercury, 0.002 mass percent cadmium or 0.004 mass percent lead is present, batteries and accumulators must be marked with the symbols "Hg", "Cd" and "Pb".
Cd = battery contains cadmium
Hg = battery contains mercury
Pb = battery contains lead
Mh = battery contains metal hydride
